Archery Analytics RyngDyng 설치 및 운영 매뉴얼

{카테고리_이름} Archery Analytics RyngDyng에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Archery Analytics RyngDyng 2 페이지.

페이지 인쇄

RyngDyng

A short manual for installation and operation

A more explicit manual is provided here

https://www.archery-analytics.com/en/public/downloads.

1. Positioning of RyngDyng

Place RyngDyng at a distance of 3 m (= 3.3 yd. = 3 x length of case)

on the ground. The distance is measured between the case and the

foot point of the target center.

If the shooting distance is over 50 m (55 yd.), the reach of the Wi-Fi

network can be extended if you place the router about 15 m (16 yd.)

from RyngDyng and in direction to the shooting line. For a maximum

reach, place the router 1 – 2 m (3-6 yd.) above ground.

2. Start the RyngDyngApp

Install and start the RyngDyngApp on your

device. In order to get the full functionality of

the app, it is important you have a personal

account at

www.archery-analytics.com

and to

enter the login and password also in the app.

Installation of the app is most easily done by

scanning the QR Code. Detailed information regarding all functions

of the RyngDyngApp can be found here:

https://www.archery-analytics.com/en/public/ryngdyng/app

3. Power supply

First power on the Wi-Fi router using the USB charger or a USB

power bank. As soon as the Wi-Fi network is on, the red LED lights

up. Now you can power on RD600 by connecting the red cable with

the USB charger or with a USB-C power bank. RD720 has got a

dedicated power supply. During boot up, RyngDyng will

automatically connect to the Wi-Fi network.

4. Connect RyngDyngApp and RyngDyng

Hook up your device to the Wi-Fi network (SSID: RyngDyng,

Password is provided with the router).

In the app, go to page ‚Connections'. RyngDyngs connected to the

network will be listed there. If not, try the button 'search for

connected RyngDyngs'.

Press the button ‚connect with ryngdyngxy'. As soon as the

connection is established, the indicator turns from red to green:

5. Aligning RyngDyng

The RyngDyngApp provides test images to enable proper

alignment (calibrations -> test image). The RyngDyng case

should be aligned in such a way that the red hair cross

points to the center of the target and the red lines appear

horizontal and vertical respectively. Turn the adjustable

stands if necessary. It is very important to provide for a solid

stand. On grass, better use a wooden board or stone plates

to place RyngDyng on.

6. Chessboard calibration

The chessboard stripes are pinned onto the target horizontally. The

printed marks support the vertical adjustment of the bands. The

center of the target should have the same distance to all 4

chessboards.

On the page 'Chessboard calibration', select and press the button

that fits the size of the target. The result of the calibration is shown in

an image as below:

7. Target face recognition

Remove the chessboard stripes and put the target faces on. Press

the button ‚recognize target faces'. All target faces will be measured

automatically. The result is presented in the control image returned.

Every recognized target has got one or mere letters: