Aybey Elektronik EVOS Series 설치 매뉴얼 - 페이지 4

{카테고리_이름} Aybey Elektronik EVOS Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aybey Elektronik EVOS Series 5 페이지. Serial communication lop

2- Electrical Connections

Figure 4

Figure 5

1 Connect the CANBUS cable terminals of the LOPs to the corresponding socket on the

control panel. (100-1000-CL1-CH1).

2.2 If your system has a pit control unit with CAN interface as shown in Figure 4, connect

all LOPs to this unit wth CAN-BUS cables with dual white rectangular sockets.

2.3 If there is no electronic pit control card with serial communication, connect the LOP

on the lowest floor as shown in Figure 5 and complete the process.

3- Operation and Setting Procedures

Select the display you have used for display settings from EK04 and follow the

instructions.

After completing the settings, close the top cover of the LOP.