Aybey Elektronik ALYA Series 설치 매뉴얼 - 페이지 5

{카테고리_이름} Aybey Elektronik ALYA Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aybey Elektronik ALYA Series 5 페이지. Tft display serial communication lop

4- Firmware Update



The software of TFT display can be updated by using SD card. The procedure for

updating the software is as follows:



Save the new file must into the SD card.



Switch off the power of LOP.



Press UP and DOWN buttons simultaneously and hold them pressed while

switching on LOP



When the update screen shown below appeares release the buttons.



Select the file you want to upload (with ".clt" extension) on the update screen

by using UP and DOWN buttons. Press ENT button to upload highlighted file for

update.



Warning : During the update process, never turn off the power.



After update process has been completed, the LOP will be restarted.



When the LOP is restarted, ID number and software version will appear on the

screen.

5-Caution

4.1 Use only special stainless steel cleaners to clean the panels.

4.2 Do not use any detergent or acids to clean panels.

4.3 Avoid to contact any liquid to the LOP.

4.4 In case of an electrical failure, switched off the LOP and contact with Aybey

Elektronik Technical Service.