ABB Safeball JSTD1-E 원본 사용 설명서 - 페이지 13
{카테고리_이름} ABB Safeball JSTD1-E에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB Safeball JSTD1-E 15 페이지. One/two hand enabling device
7
Technical data
Manufacturer
Address
Power supply
Voltage
Max current (resistive load)
Min current (resistive load)
Total current consumption
General
Degree of protection
Ambient temperature
Connector
Size
Actuating force
Actuator travel
Mechanical life
Colour
Weight
Material
Chemical resistance at 20°C
Alcohols
Paraffin oil
Milk
Silicon oil
Acetone
Please contact ABB Jokab Safety for more information regarding other substances.
Information for use in USA / Canada
Surrounding air temperature maximum 40°C
Type 1
The device should be mounted on an ultimate enclosure.
Resistive only
2TLC172182M0201, rev. F
2015-12-04
ABB JOKAB SAFETY
Varlabergsvägen 11
SE-434 39 Kungsbacka
Sweden
24 VDC. Tolerance 5 – 30 VDC
2 A at 30 VDC (max)
20 mA at 24 VDC (recommended)
10 mA at 6 VDC
< 50 mA
IP67 - not intended for use under water.
-25...+50°C
2
4x connection cables, 0.75 mm
See drawing
Approx. 2 N
1.3 ± 0.6 mm
6
> 1 x 10
operations at max 1 Hz
Yellow and black
JSTD1-B, -E: 95 g
JSTD1-A: 225 g (with 2 m cable)
JSTD1-C: 680 g (with 10 m cable)
Polypropene
Good
Good
Good
Good
Good
13
. Length depending on model.
www.abb.com/jokabsafety