ABB vital 1 원본 사용 설명서 - 페이지 13

{카테고리_이름} ABB vital 1에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB vital 1 20 페이지. Safety controller
ABB vital 1에 대해서도 마찬가지입니다: 매뉴얼 (14 페이지)

페이지 인쇄
ABB vital 1 원본 사용 설명서

Example connections of units and cable lengths to Vital 1

Three connection alternatives
To comply with PL e according to EN ISO 13849-1, the connection of sensor/adaptor units in the Vital safety circuit
must be made as per the following connection examples.
Example 1
Use separate connection cables from each sensor/adaptor unit and connect them in series to create the Vital
safety circuit through terminals in the control cabinet. Status information is available from each individual sensor at
the terminal.
Example 2
Use Tina 4A/Tina 8A connection blocks to simplify the connection of externally installed sensors/adaptor units.
Only Tina 4A/Tina 8A connection blocks may be used. Use of any other connection block is not recommended as it
may not meet the requirements for the highest safety level. Status information is available from each individual
sensor at the connection block.
Example 3
Use M12-3A and M12-3B "Y-connectors" to connect sensors/units in series or in parallel.
2TLC172156M0201, rev. C
13
www.abb.com/jokabsafety
2016-07-04