Cisco 300 Series 빠른 시작 매뉴얼 - 페이지 10

{카테고리_이름} Cisco 300 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 300 Series 17 페이지. Managed switches
Cisco 300 Series에 대해서도 마찬가지입니다: 데이터시트 (14 페이지), 빠른 시작 매뉴얼 (18 페이지), 빠른 시작 매뉴얼 (17 페이지)

페이지 인쇄
Cisco 300 Series 빠른 시작 매뉴얼
•
8 data bits
•
no parity
•
1 stop bit
•
no flow control
Enter a user name and password. User names and passwords are
S
4
TEP
both case sensitive and alpha-numeric. The default username is
cisco, and the default password is cisco.
If this is the first time that you have logged on with the default
S
5
TEP
username and password, the following message appears:
Please change your password from the default
settings. Please change the password for better
protection of your network. Do you want to change
the password (Y/N) [Y]?
Select Y, and enter a new administrator password.
S
6
TEP
Make sure that any configuration changes are saved before
C
AUTION
exiting by issuing the command:
copy running-config startup-config
You are now ready to configure the switch. Refer to the
Business 300 Series Managed Switch Administration Guide
information.
If you are not using DHCP on your network, set the IP address type
N
OTE
on the switch to Static and change the static IP address and subnet
mask to match your network topology. Failure to do so may result in
multiple switches using the same factory default IP address of
192.168.1.254.
10
Cisco Small
for further
300 Series Managed Switches