Digisol DG-GR6010 빠른 설치 매뉴얼 - 페이지 5
{카테고리_이름} Digisol DG-GR6010에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digisol DG-GR6010 17 페이지. Xpon onu router with 1 pon and 1 giga port
Digisol DG-GR6010에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (20 페이지)
페이지 인쇄
Installation
2:1 Installation Requirements
To avoid equipment damage caused by improper use and personal injury,
please observe the following precautions:
Do not place the device near water or in damp places, in order to
●
prevent water or moisture from entering the device.
Do not place the device in an unstable place, avoid falling damage to
●
equipment.
Make sure that the supply voltage of the device matches the required
●
voltage value.
Do not open the equipment chassis without permission.
●
Unplug before cleaning the power plug; prohibit the use of liquid cleaning.
●
Installation Environment Requirements
ONU equipment must be installed in the interior and ensure the following
conditions are meet:
Confirmation at the ONU installation site to have sufficient space to
●
facilitate cooling machine.
ONU suitable operating temperature of -10
●
humidity 10% to 90%.
Electromagnetic Environment
ONU equipment in use can be affected by external electromagnetic
interferences, such as radiation and conduction through the impact on the
device, this should note the following:
Device workplace should avoid radio transmitters, radar stations, and
●
high-frequency interference from power equipment.
Users cable typically require alignment indoors if outdoor lightning
●
traces measures should be taken.
Equipment Installation
ONU product is a fixed configuration cassette equipment, site equipment
installation is relatively simple. Simply install the device on a specified place,
connecting the upstream fiber subscriber line connections, connect the
power cable. Actual operation is as follows:
°C
~55
°C
,