Digisol RANGER SERIES 빠른 설치 매뉴얼 - 페이지 11

{카테고리_이름} Digisol RANGER SERIES에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digisol RANGER SERIES 16 페이지. 2.4ghz ge outdoor access point with poe
Digisol RANGER SERIES에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (12 페이지)

Digisol RANGER SERIES 빠른 설치 매뉴얼

Getting Started

Software Preparation:
Most computers are connecting to a local network with dynamic IP (DHCP) setting.
To access the web UI of the device, you have to change your computer‟s TCP/IPv4
settings into a static IP setting for the Ethernet Interface.
The device‟s default IP address is 192.168.123.50, and your computer must be
assigned with a 192.168.123.x IP address to get access to the device.
Set the TCP/IPv4 address of your computer to 192.168.123.25, and subnet mask
to 255.255.255.0.
After applying this setting, you can now access the web UI for configuring the
device.
Easy Setup via Web UI
You can browse web UI to configure the device. Firstly you need to launch the
Setup Wizard browser first and then the Setup Wizard will guide you step-by-step
11