Sharp CD-BA2600H 운영 매뉴얼 - 페이지 22

{카테고리_이름} Sharp CD-BA2600H에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-BA2600H 42 페이지. Mini component system
Sharp CD-BA2600H에 대해서도 마찬가지입니다: 운영 매뉴얼 (5 페이지)

페이지 인쇄

1. Speaker System

Listening to the Radio

E-16

ENGLISH

Sound Control (See page 10.)

Press the ON/STAND-BY button to turn the power on.

Press the TUNER (BAND) button repeatedly to select the desired

frequency band (FM or AM).

Press the TUNING/TIME (

station.

Manual tuning:

Press the TUNING/TIME button as many times as required to tune in to the de-

sired station.

Auto tuning:

When the TUNING/TIME button is pressed for more than 0.5 seconds, scanning

will start automatically and the tuner will stop at the first receivable broadcast sta-

tion.

Notes:

z When radio interference occurs, auto scan tuning may stop automatically at

that point.

z Auto scan tuning will skip weak signal stations.

z To stop the auto tuning, press the TUNING/TIME button again.

z When an RDS (Radio Data System) station is tuned in, the frequency will be

displayed first, and then the RDS indicator will light. Finally, the station name

will appear.

z Full auto tuning can be achieved for RDS stations "ASPM", see page 20.

To receive an FM stereo transmission:

Press the TUNER (BAND) button to display the "ST" indicator.

z " " will appear when an FM broadcast is in stereo.

FM stereo mode indicator

FM stereo receiving indicator

z If the FM reception is weak, press the TUNER (BAND) button to extinguish the

"ST" indicator. The reception changes to monaural, and the sound becomes

clearer.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

) button to tune in to the desired