Sharp Notevision PG-D40W3D 설정 매뉴얼 - 페이지 14
{카테고리_이름} Sharp Notevision PG-D40W3D에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Notevision PG-D40W3D 35 페이지. True xga/wxga data projectors
Sharp Notevision PG-D40W3D에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 사양 시트 (2 페이지), 사양 (2 페이지), 브로셔 및 사양 (2 페이지)
페이지 인쇄
Setting up the Projector Network Environment
3. Setting up a Network Con-
nection for the Projector
Settings for such items as the projector's
IP address and subnet mask are
compatible with the existing network.
Set each item on the projector as follows.
(See page 50 of the projector's operation
manual for setting.)
DHCP Client: Off
IP Address: 192.168.150.002
Subnet Mask: 255.255.255.000
1
1
Start Internet Explorer (version 5.0
or later) on the computer, and
enter "http://192.168.150.2/" in
"Address", and then press the
"Enter" key.
2
2
If a user name and a password
have not yet been set, just click
the "OK" button.
•
If a user name and a password have been
set, input the user name and the password,
and click the "OK" button.
•
If the user name or password is entered
incorrectly three times, an error message will
be displayed.
•
When you are using Internet Explorer 7, other
setup screen may be displayed. In this case,
make the proper adjustments for the setup
screen.
3
3
When the screen as shown on the
right appears, click "TCP/IP".
-14