Sharp Notevision XG-C330X 설정 매뉴얼 - 페이지 24

{카테고리_이름} Sharp Notevision XG-C330X에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Notevision XG-C330X 45 페이지. True xga portable lcd projectors
Sharp Notevision XG-C330X에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 사양 (2 페이지), 사양 (2 페이지)

페이지 인쇄

Controlling the Projector via LAN

After connecting the projector to your network, enter the projector IP address in "Address"

on Internet Explorer (version 5.0 or later) using a computer on the network to start a setup

screen that will enable control of the projector via the network.

Controlling the Projector

Using Internet Explorer

(Version 5.0 or later)

Complete connections to external equipment

before starting the operation. (See pages 21-

29 of the projector's operation manual.)

Complete the AC cord connection. (See page

30 of the projector's operation manual.)

Note

• When connecting the projector to the LAN, use

a LAN cable (Category 5). When connecting the

projector to a hub, use a straight-through cable.

Start Internet Explorer (version 5.0

or later) on the computer.

Enter "http://" followed by the

projector IP address set by the

procedure on page

by "/" in "Address", and then

press the "Enter" key.

• The factory default setting for the

projector : "DHCP Client" is "Off" and IP

address is "192.168.150.2". If you did

not change the IP address in "3. Setting

up a Network Connection for the

Projector" (pages 22-23), enter "http://

192.168.150.2/".

A screen for controlling the pro-

jector appears, ready for per-

forming various status condi-

tions, control, and settings.

-24

followed