Shimano BL-T8000 딜러 매뉴얼 - 페이지 20

{카테고리_이름} Shimano BL-T8000에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano BL-T8000 39 페이지. Hydraulic disc brake

MAINTENANCE

Adding Shimano genuine mineral oil and bleeding air

Once there are no more air bubbles mixed in with the oil, temporarily close the bleed nipple.

(B)

To be continued on next page

Set a 7mm socket wrench in place as

shown in the illustration, and then

attach the bag to the tube. Connect the

tube to the bleed nipple and loosen the

bleed nipple.

(A)

After a little while, the oil and air

bubbles will flow naturally from the

bleed nipple into the tube.

This way it will be possible to easily

extract the greater part of the air

bubbles remaining inside the brake

system.

(z)

Air bubbles

(z)

NOTE

Secure the brake caliper in a vise to prevent

the tube from being accidentally

disconnected.

Do not depress and release the lever

repeatedly.

Oil without air bubbles may come out as a

result of such operation, but air bubbles may

remain in the oil inside the brake caliper, and

it will take longer to bleed the air. (If you

have depressed and released the lever

repeatedly, drain out all of the oil and then

add oil again.)

(A)

7mm socket wrench

(B)

Bag

TECH TIPS

It may help to shake the hose gently or to tap

the reservoir tank or caliper gently with a

screwdriver or move the position of the

caliper at this time.