Shimano CLARIS ST-R2000 딜러 매뉴얼 - 페이지 27

{카테고리_이름} Shimano CLARIS ST-R2000에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano CLARIS ST-R2000 48 페이지. Shifting lever

MAINTENANCE

How to pull out a disconnected inner end (shifting cable)

* If it is hard to pull out the inner end, follow the procedure below.

Remove the lever from the handle, and then remove the bracket cover.

Reattach the unit cover and then tighten the screws.

Remove the screw located at the bottom

(A)

of the bracket, and then remove the unit

cover.

(B)

Pull out the inner end on the cable hook

of the winding body.

TECH TIPS

Should the inner cable break, it is

recommended that you also replace the cable

guide together with the inner cable in order

to maintain smooth shifting.

(A)

Screwdriver[#1]

(B)

Unit cover

NOTE

At this point, be careful not to touch the

spring accidentally. Doing so could cause a

malfunction.

Spring

Tightening torque

0.2 - 0.25 N·m