Shimano SG-C6011-8 딜러 매뉴얼 - 페이지 26
{카테고리_이름} Shimano SG-C6011-8에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Shimano SG-C6011-8 48 페이지.
페이지 인쇄
Installation/removal
Installation of the hub to the frame
3.
Secure with the cap nut.
In the case of INTER M brake type (brake unit fixing washer)
(1)
Check that the INTER M brake is securely installed with the brake unit fixing washer.
(2)
Attach the brake arm to the chainstay with the arm clip.
(3)
Temporarily fix the clip bolt and clip nut by lightly tightening them.
(4)
Take up slack in the chain and secure the wheel to the frame with the cap nut.
(5)
Attach the brake arm with the arm clip.
(6)
Securely install with the cap nut.
Arm clip
Clip bolt (M6 × 16 mm)
Clip nut
In the case of INTER M brake type (brake unit fixing nut)
(1)
Attach the brake arm to the chainstay with the arm clip.
(2)
Temporarily fix the clip bolt and clip nut by lightly tightening them.
(3)
Take up slack in the chain, align the wheel with the frame center, and temporarily secure it with the cap
nut.
(4)
Slightly loosen the cap nut, and fully tighten the brake unit fixing nut.
(5)
Take up slack in the chain, align the wheel with the frame center, and secure it with the cap nut.
Brake unit fixing washer
30 - 45 N·m
Cap nut
2 - 3 N·m
26