Bitspower BPA-GF1218-BK 사용 설명서 - 페이지 3

{카테고리_이름} Bitspower BPA-GF1218-BK에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bitspower BPA-GF1218-BK 9 페이지.

Notice

Before filling in the water, please make sure all the components are

installed correctly. To prevent any leakage which may damage the PC

components, please perform a 24-hour leaking test with only the pump

connected to the power supply.

Bitspower reserves the right to change the product design and

interpretations. These are subject to change without notice. Product

colors and accessories are based on the actual product.

When using leak tester on water cooling loop, in order to avoid product

damage due to excessive pressure, the input pressure should not exceed

0.5kg/cm

(Bar). If the product is damaged due to

excessive pressure, it will be borne by the customer. Forbidden to use the

leak teser when there is water in the loop or the pump is runing.

Bitspower requires to use of distilled or pure water or Bitspower Pellucid

Coolant as the water-cooling liquid. Also, the consumer can add Bitspower

Dye to Pellucid Coolant for the color requirement. But please do not add

any biocide by yourself. If the consumer chooses different water-cooling

liquids, the resulting impurities may cause peeling off the coating on some

of the hardware, water channels blockage by built-up residue, improper

operation of the water pump, water tank tube breakage, and O-rings

deformation or loss sealing leading to leakage. Any issues related to the

use of inappropriate water-cooling liquid will be the responsibility of the

consumer.

[ 3 ]