Bitstream ERIS-100 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Bitstream ERIS-100에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bitstream ERIS-100 5 페이지. Fiber opical converter - ethernet 10/100/mbps

Quick start manual, a detailed manual is on the enclosed CD or can be downloaded

from company's website www.bitstream.com.pl/en/

Designation of signaling diodes:

1. – LP LNK – signaling the correctness of connection of the remote device's electrical port;

2. – Power connection indication;

.1.2

The Ethernet port is equipped with two indicator lights.

green color

orange color

.1.3

The front panel of the device has an RJ45 interface for the electrical interface

Ethernet, SFP optical interface slot, and power connector..

The individual signals for RJ-45 connectors are shown in the table.

Pin number

1 (white/orange)

2 (orange)

3 (white/green)

6 (green)

.1.4

The device is equipped with an SFP module slot. The device supports 155Mbit/s SFP modules (MM,

SM, WDM, CWDM, DWDM, Copper). The range and type of connector depends on the type of SFP

inserted.

REV.

1.01

Fig 3. Signalling LEDs

Status of Ethernet electric interface signaling

- Signaling of correct connection, flashing during transmission

- Signaling operation of the electrical link in 100Base-TX mode

Connectors description

RJ-45 connector

Fig 4.

Connectors RJ-45 Ethernet 10/100Mbps

Signal name

RXAn

RXBn

TXAn

TXBn

Optical connectors

User Manual ERIS-100

Description

Channel n transmitter

Channel n receiver

2019.11.20

2/5