Siemens 546-00750A 설치 지침 매뉴얼
{카테고리_이름} Siemens 546-00750A에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens 546-00750A 8 페이지. Ce compliant fume hood controller application
페이지 인쇄
CE Compliant Fume Hood Controller —
Application 941 and 942
Figure 1. CE Compliant Fume Hood
Controller(Standard enclosure).
Figure 2. CE Compliant Fume Hood Controller
(Otherenclosure).
Control Applications
941 and 942
Product Description
The Fume Hood Controller Board (Figure 1 and
Figure 2) is the main termination board for the Fume
Hood Controller. The board comes with a ferrite filter
to suppress electrical emissions from the 8-
conductor cable. The ferrite filter must be installed to
meet FCC requirements and CE compliance
Item No. 546-00085. Rev. CA
Installation Instructions
Product Numbers
546-00705
CE Compliant Fume Hood Controller
— Application 941 and 942 with cover
and mounting rail
546-00705E
CE Compliant Fume Hood Controller
— Application 941 and 942 with FHC
enclosure
NOTE:
Keep the controller board in its static
proof bag until you are ready to install.
Warning/Caution Notation
WARNING
Personal injury/loss of life may
occur if you do not follow the
procedures as specified.
CAUTION
Equipment damage or loss of data
may occur if you do not follow the
procedures as specified.
Expected Installation Times
23 minutes.
Required Tools and Materials
•
Smallflat-blade screwdriver
Prerequisites
•
Fume Hood Controller Enclosure is mounted
and wiring has been roughed-in.
•
Operator Display Panel is installed and
cable pulled to location of controller.
Document No. 546-00085
December 8, 2011
Page 1 of 7