Samsung 400CX - SyncMaster - 40" LCD TV 빠른 시작 매뉴얼 - 페이지 14

{카테고리_이름} Samsung 400CX - SyncMaster - 40" LCD TV에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung 400CX - SyncMaster - 40" LCD TV 24 페이지. Quick start guide
Samsung 400CX - SyncMaster - 40" LCD TV에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (25 페이지)

페이지 인쇄

Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUDIO-L] port of the

LCD Display.

Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.

Select AV using the SOURCE .

Note

The LCD Display has AV connection terminals to connect AV input devices like DVDs, VCRs or

Camcorders. You may enjoy AV signals as long as the LCD Display is turned on.

Connecting to a Camcorder

Locate the AV output jacks on the camcorder. They are usually found on the side or back of the

camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder

and the AV AUDIO IN [L-AUDIO-R] on the LCD Display.

Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN

[VIDEO] on the LCD Display.

Select AV for the Camcorder connection using the Source button on the front of the LCD Display

or on the remote control.

Then, start the Camcorders with a tape inserted.

Note

The audio-video cables shown here are usually included with a Camcorder. (If not, check your local

electronics store.) If your camcorder is stereo, you need to connect a set of two cables.

Connecting Using a HDMI Cable

Note

•

Input devices such as digital DVD are connected to the HDMI terminal of the LCD Display using

the HDMI cable.

Connections