Samsung 403 Series 사용자 설명서 - 페이지 32
{카테고리_이름} Samsung 403 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung 403 Series 35 페이지. 4 series; 5 series
Samsung 403 Series에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), 사용자 설명서 (35 페이지), 사용자 설명서 (49 페이지), 사용자 설명서 (32 페이지), 전자 매뉴얼 (32 페이지)
페이지 인쇄
Other information
The cabb/set top box remote control
•
Program the Cabb/Sat remote control to operate the TV. Refer to the Cabb/Sat user manual
does not turn tile TV on or off, or adjust
for SAMSUNG TV code.
tile volume.
'Mode Not Supported' message.
•
Ctleck the supported resolution of the TV and adjust the external device's output resolution
accordingly. Refer to resolution settings ill this manual.
Caption on TV menu is greyed out.
•
Caption can not be selected in the TV menu wtlen connected via HDMI or Component.
®
Caption must be activated on the external device.
There is a plastic smell from the T_
,,
This smell is normal and will dissipate over time.
TV Signal Strength is unavailable in the
,,
This function is only available with digital channeb with an Antenna (RF/Coax) connection (Air
Self Diagnosis Test menu.
or Cable). (P. 20)
TV is tilted to the right or left side.
®
Remove the stand base from the TV and reassembb.
Channel menu is grey out (unavailable).
®
Channel menu is only available when the TV source is selected (Antenna or Cable).
Your settings are lost after 30 minutes
,,
If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes.
or every time the TV is turned off.
Please change from Store Demo mode to Home Use mode in the Plug & Play procedure.
Press the SO!tSRCIE button to select TV mode, go to ME_,,_ ._-_ Setup _ Plug & Play
IENTER_.
You have intermittent loss of audio or
,,
Ctleck the cable connections and reconnect them.
video.
,,
Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the
cables are flexible enough for long term use. Mounting the TV to the wall, we recommend using
cables with 90 degree connectors.
You see small particles wtlen you look
,,
This is part of the product's design and is not a defect.
closely at the edge of the frame of the
TV.
POP (TV's internal banner ad) appears
,,
Select Home Use under Plug & Play mode.
on the screen.
For details, refer to Plug & Play (Initial Setup). (R 7)
This TFT LCD/LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce.
However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of
the product.
Storage and Maintenance
If you remove
the attached
sticker
on the TV screen,
clean the residues
and then watch
TV.
2
English