Samsung 913V - SyncMaster - 19" LCD Monitor 서비스 매뉴얼 - 페이지 8
{카테고리_이름} Samsung 913V - SyncMaster - 19" LCD Monitor에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung 913V - SyncMaster - 19" LCD Monitor 35 페이지. Tft-lcd monitor gs19es chassis
Samsung 913V - SyncMaster - 19" LCD Monitor에 대해서도 마찬가지입니다: 제품 설명서 (8 페이지)
페이지 인쇄
3 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the GS19ET TFT-LCD
monitors.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling these
components.
3-1 Disassembly
Cautions:1. Disconnect the monitor from the power source before disassembly.
2. Follow these directions carefully; never use any metal instrument except provided jig to
separate the cabinet.
3. R/Cover opening jig : BH81-00001A
1. Place monitor face down on cushioned table.
Remove 4 screws from grip on the stand and
remove the stand.
2. Remove 2 screws from the rear cover and
insert the opening jig into the grooves at each
side and press until it clicks.
3. Lift the rear cover and remove 1 screws from
the shield.
4. Lift up the panel shield and remove 4 screws
from the panel shield. (Right / Left)
5. Lift up the panel shield and carefully remove
the silicon glue on the cables with a Nipper.
Caution : Lamp wire may be easily
!
damaged. Please use caution when removing
the silicon.
3-1