Siemens Silver WD 1000 TOP WD 1200 작동 및 설치 지침 - 페이지 17

{카테고리_이름} Siemens Silver WD 1000 TOP WD 1200에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens Silver WD 1000 TOP WD 1200 28 페이지.

End of washing programme

All programmes end automaticaly after the spin

cycle, and then door lock lamp will turn on.

Switching the machine OFF

1. When the door lock lamp is on, press the

ON/OFF button, the power indication lamp

and the door lock lamp will turn off when the

machine is shut down.

2. After appox.2 minutes you wll be able to

open the door and remove the washer clothes.

! Remove and foreign objects (paper clips,

coins, etc.) Inside the drum or trapped in the

rubber seal, otherwise there is a danger of rust

occurring.

Leave the door open slightly so that the machine

can dry out properly.

3. Reset any buttons that were pressed by

pressing them again.

4. Turn the tap OFF!

End of drying programme

The drying time selector has reached its end

position. The door can be opened.

1. Take the laundry out of the machine imme-

diately to prevent creasing.

This is particularly important with synthetic

fabrics..

2. Switch OFF the machine and turn off the tap.

After tumble-drying:

Cottons + Linens

- Cotton and linen items which have been

dried to iron dry should be rolled together

to prevent them from drying out completely

before they are ironed.

- Cupboard dry items must be smoothed

out and folded up.

Easy-care/synthetics

- Hang shirts and blouses individually on

hangers.