Cisco 7926G 관리 매뉴얼 - 페이지 7

{카테고리_이름} Cisco 7926G에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7926G 14 페이지. Wavelink avalanche management console
Cisco 7926G에 대해서도 마찬가지입니다: 릴리스 정보 (16 페이지), 액세서리 매뉴얼 (20 페이지), 관리 매뉴얼 (19 페이지), 사용자 설명서 (10 페이지), 사용자 설명서 (16 페이지), 관리 매뉴얼 (23 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (21 페이지)

Wavelink Avalanche Server

Item

WLAN Settings

SSID

WLAN Mode

Call Power Save

Mode

WLAN Security

Description

Assigns the Service Set Identifier (SSID) to this

profile. You must assign the same SSID to the

phone that is also assigned to access points in the

wireless network.

Determines the signal mode or priority for

selecting signal modes available in the WLAN.

Options are:

• 802.11 b/g: Use only 2.4 GHz band

• 802.11a: Use only 5 GHz band

• Auto, 802.11b/g preferred over 802.11a

(dual-band)

• Auto, 802.11a preferred over 802.11b/g

(dual-band)

The preferred band, if available, is used

Note

at power-on, but the phone may switch

to the less-preferred 2.4 GHz band, if

available, and the preferred band is lost.

After the phone has connected to the

less-preferred band, it does not scan for

the preferred band if the current band is

acceptable, and will remain connected

to the less-preferred band.

• Auto, signal strength (RSSI): Use strongest

signal in dual-band environment

Set for the type of power saving mode used in the

WLAN. Options are:

• U-APSD/PS-Poll

• None

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide

Profile Settings Fields

For more information, see ...

802.11 Standards for WLAN

Communications

802.11 Standards for WLAN

Communications