Cisco 7940G 참조 매뉴얼 - 페이지 17

{카테고리_이름} Cisco 7940G에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7940G 24 페이지. Ios telephony services ip phone
Cisco 7940G에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 사용자 설명서 (25 페이지), 데이터시트 (7 페이지), 매뉴얼 (35 페이지), 빠른 참조 (2 페이지), 사용자 설명서 (15 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (20 페이지), 전화 매뉴얼 (17 페이지), 관리자 매뉴얼 (15 페이지), 사용자 설명서 (16 페이지), 관리 매뉴얼 (29 페이지), 매뉴얼 (21 페이지), 설치 매뉴얼 (12 페이지), 사용자 설명서 (10 페이지)

페이지 인쇄
Cisco 7940G 참조 매뉴얼
when you try to Intercom .
receiving an intercom Call
When someone initiates an Intercom call to your
•
phone and your phone is idle, your phone will
beep and your speakerphone will be enabled

MUTe

Mute disables the microphone of the handset,
speakerphone or headset so you can have a private
conversation .
To enable Mute
Press the Mute button . The Mute button will glow
•
red and the display will briefly note "Microphone
Mute On" to show that Mute is active .
To disable Mute
Press the Mute button again . The Mute button
•
will go dark and the display will briefly indicate
"Microphone Mute Off" to indicate that Mute is
cancelled .

niGHT

Companies often have different call treatments
for daytime versus after-hours callers . The Night
capability can be assigned to a user's phone to
override the standard day-of-week/time-of-day logic .
The night feature has three modes:
Normal – Calls will be handled using the standard
•
day-of-week/time-of-day logic . No action is
required by the user when operating in Normal
mode .
Temporary Night Mode temporarily overrides
•
the normal day-of-week/time-of-day logic . It
toggles between day-mode and night-mode .
At the change in the day-of-week/time-of-
day schedule, the system will revert back to
Normal operation .
To enable Temporary Mode, press the Night
•
softkey once
Permanent Night Mode overrides the normal day-
•
of-week/time-of-day logic until the user manually
changes the state back to Normal
13