Cisco 7940G 관리 매뉴얼 - 페이지 9

{카테고리_이름} Cisco 7940G에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7940G 29 페이지. Ios telephony services ip phone
Cisco 7940G에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 사용자 설명서 (25 페이지), 데이터시트 (7 페이지), 매뉴얼 (35 페이지), 빠른 참조 (2 페이지), 사용자 설명서 (15 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (20 페이지), 전화 매뉴얼 (17 페이지), 관리자 매뉴얼 (15 페이지), 사용자 설명서 (16 페이지), 참조 매뉴얼 (24 페이지), 매뉴얼 (21 페이지), 설치 매뉴얼 (12 페이지), 사용자 설명서 (10 페이지)

페이지 인쇄

Chapter 3

Initializing Cisco Unified IP Phones

Modify the following required parameter:

•

The following parameters are required for line 1 if registration is enabled and the proxy server

requires authentication:

•

Save the file to the root directory of your TFTP server or to a subdirectory that contains all the

phone-specific configuration files.

Name the file SIP<mac-addr>.cnf. Type the MAC address in uppercase and the extension, cnf, in

lowercase (for example, SIP00503EFFD842.cnf).

Configuration Example

The following is an example of the phone-specific configuration file that you downloaded from

Cisco.com.

# SIP Configuration Generic File

# Line 1 appearance

line1_name: 1234567

# Line 1 Registration Authentication

line1_authname: "UNPROVISIONED"

# Line 1 Registration Password

line1_password: "UNPROVISIONED"

# Line 2 appearance

line2_name: football

# Line 2 Registration Authentication

line2_authname: "UNPROVISIONED"

# Line 2 Registration Password

line2_password: "UNPROVISIONED"

####### New Parameters added in Release 2.0 #######

# Phone Label (Text desired to be displayed in upper right corner)

phone_label: ""; Has no effect on SIP messaging

# Line 1 Display Name (Display name to use for SIP messaging)

line1_displayname: "User ID"

# Line 2 Display Name (Display name to use for SIP messaging)

line2_displayname: ""

####### New Parameters added in Release 3.0 ######

OL-7890-01

linex_name—Number or e-mail address used when registering. When entering a number, enter

the number without any dashes. For example, enter 555-1212 as 5551212. When entering an

e-mail address, enter the e-mail ID without the host name.

linex_authname—Name used by the phone for authentication if a registration is challenged by

the proxy server during initialization. If a value is not configured for this parameter for a line,

and registration is enabled, the value defined for line 1 is used. If a value is not defined for line

1, the default line1_authname is UNPROVISIONED.

linex_password—Number or e-mail address used when registering. When entering a number,

enter the number without any dashes. For example, enter 555-1212 as 5551212. When entering

an e-mail address, enter the e-mail ID without the host name.

Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)

How to Customize a Phone-Specific Configuration File

3-9