Samsung W56V 소유자 매뉴얼 - 페이지 22

{카테고리_이름} Samsung W56V에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung W56V 50 페이지. Samsung monitor owner's manual

페이지 인쇄

Check List

Note

Before calling for service, check the information in this section to see if you can remedy

any problems yourself. If you do need assistance, please call the phone number on the

warranty card, the phone number on the Information section or contact your dealer.

Symptom

No images on the screen. I

cannot turn on the monitor.

I cannot see the On Screen

Display.

Check List

Is the power cord connected

properly?

Can you see "

" on

the screen?

If the power is on, reboot the

computer to see the initial

screen(the login screen),

which can be seen.

Can you see "

" on the

screen?

There is no image on the

screen. Is the power indicator

on the monitor blinking at 1

second intervals?

Have you locked the On

Screen Display (OSD)

Menu to prevent changes?

Solutions

Check the power cord connection and

supply.

Check the signal cable connection.

If the initial screen (the login screen)

appears, boot the computer in

the applicable mode (the safe mode

for Windows XP/2000)

and then change the frequency of the

video card.

(Refer to the Preset Display Modes)

Note: If the initial screen (the login

screen) does not appear, contact a

service center or your dealer.

You can see this message when the

signal from the video card exceeds the

maximum resolution and frequency

that the monitor can properly handle.

Adjust the maximum resolution and

frequency that the monitor can

properly handle.

The monitor is in PowerSaver mode.

Press a key on the keyboard or move

the mouse to activate the monitor and

restore the image on the screen.

Unlock the OSD by pressing the

MENU button for at least 10 seconds.