Siemens 1G03QB 630G 사용 설명서 지침 - 페이지 9

{카테고리_이름} Siemens 1G03QB 630G에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens 1G03QB 630G 32 페이지.

Adding rinse aid

The rinse aid is required for stain-free

utensils and clear glasses.

Use only rinse aid for domestic

dishwashers.

Open the cover on the rinse-aid

dispenser

. To do this, press the

mark (1 ) on the cover and

simultaneously lift the cover on the

control plate (2

Carefully pour in the rinse aid to just

below the edge of the filler opening.

Close the lid, ensuring that you hear it

snap closed.

To prevent excessive foam formation

during the next rinse cycle, remove any

rinse aid which has run over with a cloth.

Adjusting the amount of

rinse-aid

The amount of rinse-aid added to the

water can be varied by adjusting the

stepless control. The rinse-aid control has

been set to "4" in the factory.

Do not alter the setting of the rinse-aid

control unless streaks (turn knob towards

"–") or water marks (turn knob towards "+")

are left on the dishes.

Rinse-aid refill indicator

As soon as the rinse-aid refill indicator

lights up on the control panel

refill with rinse aid.

If using detergent products with integrated

rinse aid, the rinse-aid refill indicator

can be switched off (see "Switching

the rinse-aid refill indicator off and on"

in the "auto 3in1" chapter).

Rinse aid controller