Cisco 7942G - Unified IP Phone VoIP 사용자 설명서 - 페이지 10

{카테고리_이름} Cisco 7942G - Unified IP Phone VoIP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7942G - Unified IP Phone VoIP 12 페이지. Unified communications manager 9.0 (sccp and sip)
Cisco 7942G - Unified IP Phone VoIP에 대해서도 마찬가지입니다: 사용자 설명서 (23 페이지), 데이터시트 (5 페이지), 설치 매뉴얼 (12 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (4 페이지), 관리 매뉴얼 (12 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (16 페이지), 매뉴얼 (11 페이지), 사용자 설명서 (6 페이지), 관리 매뉴얼 (16 페이지), 문제 해결 및 유지 관리 (27 페이지)

Consultative Transfer

Redirects the call after first allowing you to speak to the transfer recipient.

To make a consultative transfer:

1. During a call, press the Trnsfer soft key. The call is placed on hold.

2. Dial the number to which you want to transfer the call.

3. Wait for the call to be answered. Speak to the transfer recipient. Then press the Trnsfer button or hang up the handset.

4. If the transfer fails, (if no one answers, or call goes to voice mail, press the Resume soft key to return to the

original call.

Cancel Transfer

1. To cancel your consultative call-transfer attempt:

– Press the EndCall soft key.

2. To reconnect to the original caller:

– Press the Resume soft key.

To Transfer a Caller to Another Persons Voice Mail Greeting

1. Press the Transfer soft key.

2. Dial 6991 + the Extension Number of the Voice Mail Greeting you want the call to go to.

3. As soon as the Greeting begins, press Transfer, or hang up.

To Send a Ringing Call to your Voice Mail Greeting

While your phone is ringing, press the iDivert soft key.

To Forward All Calls to your Voice Mail Greeting

1. With your phone on-hook, press the CFwdALL soft key, then press the Messages feature key.

To cancel forwarding of calls to Voice Mail, with phone on-hook, press the CFwdALL soft key

–

Place and Establish a Conference Call

To create a conference call: (the system supports up to eight participants, including yourself, in an ad hoc

conference call)

1. During a call, press the more soft key and then the Confrn soft key to open a new line and put the first party on hold.

2. Plac e a call to another number.

3. When the call connects, press Confrn again to add the new party to the call.

To add more parties to the conference call, repeat the above steps until you have everyone in the conference.

End a Conference Call

To exit the conference call:

Hang up the handset, or press the EndCall soft key.

Note

When the conference call initiator hangs up, the remaining conference call participants remain connected.

To drop individual participants from the conference, press the more soft key until ConfList is displayed, press ConfList. Use

the Navigation button to highlight which particiapant(s) you want to drop from the call. Press the Remove soft key.