Siemens EC9A5RB90A 사용자 지침 - 페이지 10

{카테고리_이름} Siemens EC9A5RB90A에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EC9A5RB90A 20 페이지. 90 cm gas cooktop
Siemens EC9A5RB90A에 대해서도 마찬가지입니다: 사용자 지침 (20 페이지)

페이지 인쇄

Gas burners

It is essential to ensure that all the burner parts and pan

supports are correctly installed for the appliance to

work correctly. Do not swap the burner caps around.

Always remove the pan supports carefully. When

moving a pan support, the pan supports next to it may

also move.

Elements

Ignition plug

Thermocouple

Burner cup

Burner cap

Accessories

Depending on the model, the hob may include the

following accessories. These can also be acquired from

the Technical Assistance Service.

Additional wok grid

Only suitable for use on wok

burners. Use cookware with a

rounded base.

Additional espresso maker

grid

Only suitable for use on the

smallest burner. Use cookware

with a diameter of less than

12 cm.

--------

Code

HZ233540 Additional wok grid: Cast iron (4-5 kW)

HZ233440 Additional wok grid: Cast iron (mini wok

burner)

HZ241110 Additional espresso maker grid

HZ298105 Simmer Plate

HZ211310 Simmer cap

The manufacturer accepts no liability if these

accessories are not used or are used incorrectly.

ÄGas burners

Switching on manually

G a s b u r n e r s

Press the control knob for the selected burner and

turn it anticlockwise to the highest power setting.

Hold an igniter or a naked flame (such as a lighter or

a match) against the burner.

Automatic ignition

If your appliance has automatic ignition (ignition plugs):

Press the control knob for the selected burner and

turn it anticlockwise to the highest power setting.

Sparks are produced on all burners while you are

pressing and holding the control knob. The burner

ignites.

Release the control knob.

Turn the control knob to the required position.

If the burner does not ignite, switch it off and repeat the

steps described above. This time, hold the control knob

down for longer (up to 10 seconds).

Simmer plate

This accessory part is only suita-

ble for simmering. It can be

used with the economy burner

or the standard-output burner. If

your hob has several standard-

output burners, we recommend

placing the simmer plate on the

rear or front-right standard-out-

put burner.

Place the accessory component

with the projections facing

upwards on the holder; never

place it directly on the burner.

Simmer cap

Burner cap that is used only

when cooking at minimum out-

put. The simmer cap must be

placed on the cover for the

economy burner.