Siemens EH Series 설치 및 사용 설명서 지침 - 페이지 11

{카테고리_이름} Siemens EH Series에 대한 설치 및 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EH Series 20 페이지.
Siemens EH Series에 대해서도 마찬가지입니다: 사용 설명서 (34 페이지), 사용 설명서 (16 페이지), 사용 설명서 (24 페이지), 사용자 설명서 (20 페이지)

페이지 인쇄

Empty pans or those with a thin base

Do not heat empty pans, nor use pans with a thin base. The

hob is equipped with an internal safety system. However, an

empty pan may heat up so quickly that the "automatic switch

off" function may not have time to react and the pan may reach

very high temperatures. The base of the pan could melt and

damage the glass on the hob. In this case, do not touch the

pan and switch the hotplate off. If it fails to work after it has

cooled down, please contact the Technical Assistance Service.

Getting to know your appliance

The instruction manual is the same for various different hobs.

An overview of the models with their dimensions is given on

page 2.

The control panel

Control panels

Main switch

Selecting the hotplate

Selecting settings

Powerboost function

›

Time program function

Childproof lock

‚

The hotplates

Hotplate

Single hotplate

Use only cookware suitable for induction cooking; see the section on suitable cookware.

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show

those which are still hot. Avoid touching them when this

indicator is lit.

Pan detection

Each hotplate has a minimum limit for detecting pans, which

varies depending on the material of the pan being used. You

should therefore use the hotplate that is most suitable for the

diameter of your pan.

Indicators

‹

‚

›

•

‹‹

Control panels

Pressing a symbol activates its corresponding function.

Note: Always keep the control surfaces dry. Moisture can affect

proper working.

Turning on and off

Always use cookware of a suitable size.

Although the hob is switched off, the indicator

remain on for as long as the hotplate is hot.

If the pan is removed before the hotplate is turned off, the

indicator

alternately.

Functionality

Power levels

Powerboost function

Residual heat

Time program function

•

and the selected power level will appear

will

•