Siemens EH6 M 11 Series 사용 설명서 - 페이지 25
{카테고리_이름} Siemens EH6 M 11 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EH6 M 11 Series 28 페이지.
페이지 인쇄
Hob surround
Fixing malfunctions
Display
Malfunction
none
The electric power supply
has been interrupted.
The appliance has not
been correctly connected
according to the
connection drawing.
Electronic system
malfunction.
E flashes
The control panel is damp
or an object is resting on it
EÖ +
Electronic system
number/
malfunction
p + number/
+ number/
F0/F9
There is an internal error
in the system
All manuals and user guides at all-guides.com
To prevent damage to the hob surround, follow the
advice below:
Only use warm water with a little soap
H
Never use sharp or abrasive products
H
Do not use the glass scraper
H
Malfunctions are generally caused by minor faults.
Before contacting Technical assistance, ensure you
have read the following recommendations and
warnings.
Measure
Use other electrical appliances to check if there has been
a break in the electric power supply.
Check that the appliance has been connected correctly
according to the connection drawing.
If the checks above do not remedy the malfunction,
contact technical assistance.
Dry the control panel area or remove the object.
Disconnect the cooking hob from the mains. Wait a few
seconds before connecting it again. If the indication
continues, notify the technical assistance service.
Disconnect the cooking hob from the mains. Wait a few
seconds before connecting it again. If the indication
continues, notify the technical assistance service.
25