Siemens EH6..MN1.. series 사용 설명서 - 페이지 7
{카테고리_이름} Siemens EH6..MN1.. series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EH6..MN1.. series 16 페이지.
The hotplates
Hotplate
Single hotplate
$
Flexible hotplate
û
Only use pans suitable for induction cooking, see the "Appropriate cookware" section.
Residual heat indicator
The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.
Programming the hob
This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.
Switching the hob on and off
The hob is turned on and off with the main switch.
To switch on: press the
#
main switch lights up. The hob is ready for use.
To switch off: press the
#
main switch disappears. All hotplates are off. The residual heat
indicator stays on until the hotplates have cooled down
completely.
Note: The hob switches off automatically when all the hotplates
are switched off for more than 20 seconds.
Setting the hotplate
The desired power level is set in the programming panel.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
Cooking guidelines table
The table below contains some examples.
Cooking times depend on the power level, type, weight and
quality of the food. As such they are approximate.
Power levels affect cooking results.
Melt
Chocolate, chocolate coating, butter, honey
Gelatine
* Uncovered cooking
** Uncovered
Activating and deactivating
Use a correctly sized pan.
See "flexible hotplate" section
symbol. The indicator above the
symbol until the indicator above the
Even when switched off, the
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
indicators and the selected power level will appear alternately.
Setting the power level
The hob must be switched on.
Press the
symbol to select the power level.
ý
1.
the power level indicator and the symbol
corresponding hotplate.
Slide your finger over the programming panel until the
2.
required power level is displayed.
Select the hotplate and set the required low heat level using
3.
the programming panel.
Switch off the hotplate
Select the hotplate and set it to
The hotplate turns off and the residual heat indicator appears.
Notes
Upon selecting a hotplate the
■
then proceed to be adjusted.
If no pan has been placed on the induction hotplate, the
■
selected power level flashes. After a certain time has
elapsed, the hotplate switches off.
When heating purées, creams and thick sauces, stir
occasionally.
Use power level 9 to begin cooking.
Power level
1-1.
1-1.
/
light will remain on as long as
œ
•
appears on
‹
on the
À
‹
in the programming panel.
symbol is displayed. It may
N
Cooking time
(minutes)
-
-
/
œ
•
7