Cisco 7961G - IP Phone VoIP 전화 매뉴얼 - 페이지 27

{카테고리_이름} Cisco 7961G - IP Phone VoIP에 대한 전화 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7961G - IP Phone VoIP 30 페이지. Unified communications manager 9.0 (sccp and sip)
Cisco 7961G - IP Phone VoIP에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 사용자 설명서 (25 페이지), 빠른 참조 (2 페이지), 사용자 설명서 (4 페이지), 데이터시트 (8 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (13 페이지), 관리 매뉴얼 (12 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (13 페이지), 매뉴얼 (12 페이지), 사용자 설명서 (6 페이지), 관리 매뉴얼 (16 페이지)

Troubleshooting Your Phone

This section provides troubleshooting information for your Cisco Unified IP Phone.

General Troubleshooting

This section provides information to help you troubleshoot problems with your phone. For more

information, please contact the IMT Support Desk.

Symptom

The softkey that you

want to use does not

appear

Join fails

Transfer fails

A call cannot be

retrieved from hold

Call does not hang up

Explanation

One or more of the following factors might apply:

• You must press more to reveal additional softkeys.

• You must change the line state (for example, go off-hook or have a

connected call).

• Your phone is not configured to support the feature associated with

that softkey.

Join requires multiple selected calls. Be sure that you have selected at

least one call in addition to the active call, which is selected automatically.

Join also requires the selected calls to be on the same line. If necessary,

transfer calls to one line before joining them.

Make sure to press Transfer again after the target number is dialed.

From an active call, press Transfer, enter the target number, and press

Transfer again to complete the transfer.

Make sure the appropriate call is highlighted and press Resume. You

may need to scroll up or down to highlight the desired call before pressing

Resume. If necessary, press the appropriate line button first.

Make sure that the handset is placed properly in the cradle and not stuck

on the handset rest tab.