Cisco 7971G-GE - IP Phone VoIP 설치 매뉴얼 - 페이지 7

{카테고리_이름} Cisco 7971G-GE - IP Phone VoIP에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7971G-GE - IP Phone VoIP 19 페이지. Unified ip phones
Cisco 7971G-GE - IP Phone VoIP에 대해서도 마찬가지입니다: 설치 준비 (17 페이지), 문제 해결 및 유지 관리 (25 페이지), 사용자 설명서 (42 페이지)

페이지 인쇄

Cisco Unified IP Phones Installation

Before You Begin

Remove the hookswitch clip, if necessary (see

Procedure

Step 1

Connect the handset to the Handset port.

Step 2

Connect a headset to the Headset port.

You can add a headset later if you do not connect one now.

See

Headset, on page 4

Step 3

Connect a wireless headset. You can add a wireless headset later if you do not want to connect one now.

Note

See the wireless headset documentation for information.

Step 4

Connect the power supply to the Cisco DC Adapter port.

See

Cisco Unified IP Phone

Step 5

Connect a straight-through Ethernet cable from the switch to the 10/100/1000 SW port on the Cisco Unified

IP Phones 7975G and 7971G-GE, or to the 10/100 SW port on the Cisco Unified IP Phones 7970G, 7965G

and 7945G.

Each Cisco Unified IP Phone ships with one Ethernet cable in the box.

You can use either Category 3/5/5e/6 cabling for 10 Mbps connections, but you must use Category 5/5e/6 for

100 Mbps connections and Category 5e/6 for 1000 Mbps connections.

See

Network and Access Ports, on page 3

Step 6

Connect a straight-through Ethernet cable from another network device, such as a desktop computer, to the

10/100/1000 PC port on the Cisco Unified IP Phones 7975G and 7971G-GE, or to the 10/100 SW port on the

Cisco Unified IP Phones 7970G, 7965G and 7945G.

You can connect another network device later if you do not connect one now.

You can use either Category 3/5/5e/6 cabling for 10 Mbps connections, but you must use Category 5/5e/6 for

100 Mbps connections and Category 5e/6 for 1000 Mbps connections.

See

Network and Access Ports, on page 3

Cisco Unified IP Phone Cable Installation

See the following figure and table to connect your phone.

for supported headsets.

The Cisco Unified IP Phones 7971G-GE and 7970G do not support wireless headsets.

Power.

Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified

Cisco Unified IP Phone Cable Installation

Handset, on page

3), from the cradle area.

for guidelines.

Communications Manager 9.0 (SCCP and SIP)