Cisco 8865NR 매뉴얼 - 페이지 7
{카테고리_이름} Cisco 8865NR에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 8865NR 11 페이지. Add buttons to your phone
Cisco 8865NR에 대해서도 마찬가지입니다: 사용자 설명서 (24 페이지), 매뉴얼 (44 페이지), 매뉴얼 (14 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
Energy Savings
Your administrator can reduce the amount of power your phone screen uses when you're not using your
phone. Your administrator can set up these energy-saving levels on your phone:
Power Save—The backlight or screen turns off when the phone is inactive for a set interval.
•
Power Save Plus—Your phone screen turns on and off at times that are based on your work schedule.
•
If your work hours or work days change, you can contact your administrator to reconfigure your
phone.
For example, your administrator can set your phone to alert you 10 minutes before it turns off. You see the
Select button light up and you get a message that your phone is turning off soon. You get notifications at
these intervals:
Four rings at 10 minutes before power off
•
Four rings at 7 minutes before power off
•
Four rings at 4 minutes before power off
•
15 rings at 30 seconds before power off
•
If your phone is active, it waits until it has been inactive for a set interval before it notifies you of the
pending power shutdown.
Turn On Your Phone
When your phone turns off to save energy, the phone screen is blank and the Select button lights up.
Procedure
Press Select to turn your phone back on.
Phone Line Modes
Your phone can be set up in one of these modes:
Normal line mode—In this mode, the buttons to the left and right of the screen have different
•
functions. Usually, the left buttons are the line buttons and the right buttons are the feature buttons.
The line and feature buttons are reversed for locales that read from right to left. This mode is also
known as session line mode.
Enhanced line mode—In this mode, the buttons on the left and right of the screen can be set up as
•
line buttons. This mode increases the number of phone lines that you can see and use. You see an
alert for an incoming call.