Ricoh Pro 8300 Series CIP 교육 - 페이지 6

{카테고리_이름} Ricoh Pro 8300 Series에 대한 CIP 교육을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro 8300 Series 12 페이지.

CIP Training Pro 8300 series

Throughput

Low Power mode

If you do not use the machine for a certain period after an operation, the display will turn off and

the machine goes into Low Power mode. The machine uses less electricity in Low Power mode.

You can change the amount of time that the machine waits before switching to Low Power mode

under [Low Power Mode Timer]. For details, see "System Settings", Device Management.

You can change the machine's settings to enter Low Power mode when you press the [Energy

Saver] key. For details, see "System Settings", Device Management.

To exit Low Power mode, do one of the following:

• Press the [Check Status] key

Sleep mode

If the machine remains inactive for a speciﬁed period or the [Energy Saver] key is pressed, it enters

Sleep mode to further reduce the electricity it consumes. For details, see "System Settings", Device

Management.

When the machine is in Sleep mode, only the [Energy Saver] key and the [Check Status] key are

usable. The machine can print jobs from computers.

You can change the amount of time that the machine waits before switching to Sleep mode under

[Sleep Mode Timer]. For details, see "System Settings", Device Management.

To exit Sleep mode, do one of the following:

• Press the [Energy Saver] key

• Press the [Check Status] key

• When the machine is in Low Power mode, the [Energy Saver] key is lit. In Sleep mode, the [Energy

Saver] key ﬂashes slowly. In Fusing Unit Off mode, the [Energy Saver] key is not lit.

• The energy saving functions will not operate in the following cases:

• When ﬁxed warm-up is in progress

• When operations are suspended during printing

• When a warning message appears (The machine enters Fusing Unit Off mode unless the

cover is open.)

• When paper is jammed (The machine enters Fusing Unit Off mode except when the cover is

open.)

• When the Data In indicator is lit or ﬂashing