Ricoh Pro C5100S 사용 설명서 - 페이지 9

{카테고리_이름} Ricoh Pro C5100S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro C5100S 36 페이지. Colour controller
Ricoh Pro C5100S에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 사용자 설명서 (28 페이지), 서비스 게시판 (15 페이지)

페이지 인쇄

1. 2 mm (0.08 inches) or less

Warped paper

If the humidity is low in the place where paper is stored, paper that is exposed to air may lose

moisture and the edges may shrink. Paper with wavy edges feeds at an angle and may cause

paper jams.

Use paper that has a difference of 6 mm (0.24 inches) or less between the stack's central area and

the edge when the maximum number of sheets of paper is loaded in the paper.

1. 6 mm (0.24 inches) or less

For the values for moisture content of paper, see page 8 "Paper Specifications".

Clark Stiffness

Represents the flexibility of paper.

If the Clark stiffness is low, paper is easy to bend. It is also susceptible to moisture content and heat, so

paper with a low Clark stiffness may shrink at its edges or curl during printing. In addition, soft paper is

likely to twine around the paper rollers or belts, which may cause paper jams.

For the values for the Clark stiffness of paper, see page 8 "Paper Specifications".

Bending Stiffness

Represents the flexibility of paper.

Hard paper has a high bending stiffness. If paper has a high bending stiffness, it is difficult to bend

through the paper rollers and the pathways inside the machine and may cause paper jams.

For the values for the bending stiffness of paper, see page 8 "Paper Specifications".

CEL002

Characteristics of Paper