Ricoh Pro C7100sx 첫 번째 매뉴얼 읽기 - 페이지 33

{카테고리_이름} Ricoh Pro C7100sx에 대한 첫 번째 매뉴얼 읽기을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro C7100sx 40 페이지.
Ricoh Pro C7100sx에 대해서도 마찬가지입니다: 시작 설명서 (40 페이지)

3. Other Information for This Machine

This chapter describes laws and regulations related to this machine.

Do not copy or print any item for which reproduction is prohibited by law.

Copying or printing the following items is generally prohibited by local law:

bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.

The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its

completeness or accuracy. If you have any questions concerning the legality of copying or printing

certain items, consult with your legal advisor.

Laser Safety for Type 1 and 3

CDRH Regulations

This equipment complies with requirements of 21 CFR Subchapter J for class I laser product. This

equipment contains four VCSELs (Vertical Cavity Surface Emitting Laser), 772–792 nanometer

wavelength. The beam divergence angle is 5.5 degrees (minimum) and 7.9 degrees (maximum) in the

vertical direction, and 5.5 degrees (minimum) and 7.9 degrees (maximum) in the horizontal direction,

and laser beams are generated in Continuous Wave (CW) mode. The VCSEL has forty light sources and

the maximum output power of each light source is 1.23 milliwatt.

Caution

Use of controls or adjustments or performance of procedures other than those specified in this manual

might result in hazardous radiation exposure.

Laser Safety for Type 2 and 4

CDRH Regulations

This equipment complies with requirements of 21 CFR Subchapter J for class I laser product. This

equipment contains five VCSELs (Vertical Cavity Surface Emitting Laser), 772–792 nanometer

wavelength. The beam divergence angle is 5.5 degrees (minimum) and 7.9 degrees (maximum) in the

vertical direction, and 5.5 degrees (minimum) and 7.9 degrees (maximum) in the horizontal direction,