Ricoh PRO C7200S 사용 설명서 - 페이지 18
{카테고리_이름} Ricoh PRO C7200S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh PRO C7200S 44 페이지. Printer driver installation guide
페이지 인쇄2. Installing the Printer Driver
8.
Click [Open].
9.
Click [OK] to close the [Install From Disk] window.
10.
Select the manufacturer and model name of the machine you want to use, and then click
[OK].
The installation starts.
11.
Follow the instructions that appear. Modify settings such as printer name and default
printer configuration, as necessary. You can also print a test page.
12.
Click [Finish].
Using the LPR port
1.
Click [PCL Printer Driver] or [PostScript 3 Printer Driver] on the installer screen.
2.
The software license agreement appears in the [License Agreement] dialog box. After
reading the agreement, click [I accept the agreement.], and then click [Next >].
3.
Select a printer driver you want to use, and then click [Next >].
4.
Select [Specify a new port], and then click [Next >].
5.
Select [LPR Port], and then click [Next >].
6.
Enter the machine name or IP address in the [Name or address of server providing lpd:]
box.
7.
Enter "lp" in the [Name of printer or print queue on that server:] box, and then click [OK].
8.
Select the [Printer Name:] check box of the machine model you want to use.
9.
Configure the user code, default printer, and shared printer as necessary.
10.
Click [Continue].
The installation starts.
11.
Click [Finish].
Using the WSD port
• The WSD port can be used under Windows 7/8.1/10, or Windows Server 2008/2008
R2/2012/2012 R2/2016.
• You can connect to the printer only if both the printer and computer are on the same network
segment, or "Network discovery" is enabled. For details, see Windows Help.
16