Ricoh Pro C900s 설치 매뉴얼 - 페이지 20
{카테고리_이름} Ricoh Pro C900s에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro C900s 24 페이지. Color server options
Ricoh Pro C900s에 대해서도 마찬가지입니다: 사양 (6 페이지), 기능 설명서 (27 페이지), 브로셔 및 사양 (8 페이지), 사용자를 위한 참고 사항 (2 페이지), 사용자 부록 (24 페이지), 안전 정보 매뉴얼 (12 페이지)
•
•
Machine and Peripheral Checks
Please perform the following steps to confirm the correct installation of
the colour high volume production system:
□
Pro C900 / Pro C900s mainframe, LCT and bypass ((Printer / Copier).
□
Perfect Binder (PB5000)
□
Cover interposer section (CI5010).
□
Z-folding unit (ZF4000)
□
Booklet finisher (BK5000).
Colour High Volume Production System - Installation Guide
Pro C900
Perform an Automatic Colour Calibration procedure (Pro C900s
only).
Copy the C4 Colour Test chart and check for any copy quality
issues (Pro C900s only).
a. Feed a total of 100 sheets from each Feed Station using
both duplex and simplex modes
a. Print three bound books of 50,100 and 200 (three edge
cut) pages and check the output. Refer to the Perfect
Binder Service manual for all adjustments necessary
a. Check covers are being feed correctly from both trays.
Note: Perform the following check after confirming that the
SR5000 punch unit is punching the holes in the correct
position. See Step 9 (below) SR5000 sheet finisher for details.
b. If fitted with the GBC StreamPunch, feed covers into the
GBC StreamPunch and SR5000 punch and check the
position of the punch holes. If the holes are not in the
correct position adjust the location of the cover interposer
trays. Refer to the CI5010 Service Manual for details.
a. Print an A3 Z-Fold output and check the first fold position
and second fold position. Adjust if required using SP6-301.
a. Print a 2-sheet booklet. Check that the sides of the booklet
are stacked evenly. If the booklet needs to be stacked
tighter perform the Adjust Output Jog Position adjustment
using SP6-103
b. Check the horizontal fold position of the booklet and adjust
using the Booklet Finisher Adjustment screw. See the
BK5000 service manual for full details.
c. Check the position of the vertical fold and adjust if
necessary using SP6-201.
d. Check the position of the staples in the band adjust SP6-
200 if necessary
Page 20 of 24