Ricoh Pro C9200 사용 설명서 - 페이지 15

{카테고리_이름} Ricoh Pro C9200에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro C9200 48 페이지. Using the auto color diagnosis function
Ricoh Pro C9200에 대해서도 마찬가지입니다: 팁 (49 페이지), 사용 설명서 (24 페이지), CIP 교육 (16 페이지), 매뉴얼 (32 페이지)

페이지 인쇄

• Belt-to-paper transfer: Trailing edge correction

• Belt-to-paper transfer: Length of area to apply correction at leading edge of paper

• Belt-to-paper transfer: Length of area to apply correction at trailing edge of paper

• Current vs. Voltage

• Bias is applied using 'constant current' for drum-to-belt and belt-to-paper transfer, as this

method is resilient to changes in operational environment and thickness of the media.

• On the other hand, 'constant voltage' is used for AC bias and as this method does not require

adjustments according to paper width.

Related Advanced Settings

page 29 "Belt-to-paper transfer correction: LE/TE"

PTR Rotation Speed

The PTR [1] has the function to deliver the paper from the paper transfer timing roller.

Since the paper transport speed is controlled by the PTR, if the PTR rotation speed is slower than the

target the image will shrink, if faster than the target the image will stretch.

A problem such as side-to-side image magnification misalignment and mottling on black half-tone parts

may occur in the printed image because of the speed difference relative to the image transfer belt. To

solve this problem, it is necessary to adjust the PTR rotation speed.

Since the paper is simultaneously gripped by the PTR and the paper transfer timing roller, uneven density

and banding problems may occur, if the speed differs between these rollers. To prevent this problem,

you can adjust the PTR rotation speed.

Related Advanced Settings

page 42 "Paper transfer roller speed"

page 42 "Transfer timing roller feed speed"

DZH304

Belt-to-Paper Transfer