Ricoh Pro C9200 사용 설명서 - 페이지 16
{카테고리_이름} Ricoh Pro C9200에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro C9200 48 페이지. Using the auto color diagnosis function
Ricoh Pro C9200에 대해서도 마찬가지입니다: 팁 (49 페이지), 사용 설명서 (24 페이지), CIP 교육 (16 페이지), 매뉴얼 (32 페이지)
페이지 인쇄
2. Printing Process
Fusing
Fusing Unit
The fusing belt has a thick elastic layer, as with the previous model, to allow the belt to reach farther into
the surface indentations of textured media.
Fusing roller
Pressure roller
There are 5 heaters in the heating roller [2].
Toner is fused onto the media by applying heat to the fusing belt [1] via the heating roller [2],
maintaining consistent temperature and pressure on the media.
The fusing temperature is dependent upon the amount of toner.
(The more there is toner, the more heat needed for fusing.)
The fusing temperature can be adjusted separately for both print modes; FC and BW.
The fusing temperature is momentarily increased one notch immediately before the paper passes
through the nip, to compensate for the slight temperature drop of the fusing belt [1] due to the heat
absorption by the paper.
In addition, the target fusing temperature is momentarily increased another notch immediately before the
pressure roller [3] contacts the fusing belt, to compensate for the slight temperature drop due to the
contact.
Printing starts when the temperature of the fusing belt and pressure roller reaches the temperature range
in which paper feeding is allowed.
14
Fusing belt
Conventional fusing belt
New fusing belt
Toner
Base layer
Elastic layer
Surface layer
Textured paper
Base layer
Elastic layer
Surface layer
Textured paper
1
2
3
DZH306