Ricoh Pro C9200 팁 - 페이지 17
{카테고리_이름} Ricoh Pro C9200에 대한 팁을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro C9200 49 페이지. Using the auto color diagnosis function
Ricoh Pro C9200에 대해서도 마찬가지입니다: 사용 설명서 (48 페이지), 사용 설명서 (24 페이지), CIP 교육 (16 페이지), 매뉴얼 (32 페이지)
페이지 인쇄
RICOH Iro C9200 Series Tips on High Quality Irint
The number of envelopes that can be loaded in each tray
When loading envelopes to a tray, see the following upper limit that can be loaded.
240×332 ㎜
*1
120×235 ㎜
*1
120×235 ㎜
110× 220 ㎜
Other custom size
[Region A]
Vertical: 100.0–330.2 ㎜
Horizontal: 139.7–487.7 ㎜
[Region B]
Vertical: 3.94–13.00 inches
Horizontal: 5.50–19.20 inches
*1 Please note that envelopes with more than "paper weight 5 (220gsm)" cannot be used if its width is
139.7mm or less.
*2 For some envelopes, even if the "x-y" indicated above is 10 mm (0.4 inches) or more, it is possible
to increase the number of sheets loaded a little more. However, if a paper jam occurs, reduce the
number of sheets loaded.
Caution:
・ Flatten curls as much as possible. Curl per envelope should not exceed 5mm (0.2 inches).
・ Set the difference of the stack height of the bottom of the envelope (x) and the stack height of the
flap portion (y) to be 10 mm (0.4 inches) or below.
Setting envelope to Vacuum Feed LCIT RT5120 Tray
(1) Remove the 2 plates in the bottom of Vacuum Feed LCIT RT5120 Tray. It will be easier to
remove if you widen the side fences to the left and right.
Bypass Tray
(Tray A)
10
10
17
April.15, 2019
2-Tray LCIT
(Tray 3 to 8)
*2
20 - 40
(as a guide)
─