Ricoh Pro C9200 사용 설명서 - 페이지 19

{카테고리_이름} Ricoh Pro C9200에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro C9200 24 페이지. Using the auto color diagnosis function
Ricoh Pro C9200에 대해서도 마찬가지입니다: 사용 설명서 (48 페이지), 팁 (49 페이지), CIP 교육 (16 페이지), 매뉴얼 (32 페이지)

페이지 인쇄
Ricoh Pro C9200 사용 설명서
1.
Load sheets of paper in the tray, and select the tray from the media catalog using the
machine's control panel.
When generating paper properties, depending on the precision of the selected paper properties,
the machine prints color charts on 5 sheets of paper (for "Standard") or on 9 sheets (for "High
accuracy"). Load paper for printing charts in the paper tray.
For details about how to select the tray from the media catalog, see "Specifying a Custom Paper"
Preparation.
2.
Click the [Configuration] tab, and then click [Paper].
3.
In the "Paper" screen, select the paper loaded in Step 1.
4.
Click the [ACD Property].
5.
Click [Generate] in the "ACD Property" screen.
6.
In the "Generate ACD Property" screen, select the accuracy (High accuracy/Standard),
and then click [OK].
The color charts are printed, and paper properties are generated.
The number of color charts to be printed is 5 for "Standard" and 9 for "High accuracy".
7.
Click [CLOSE] in the "ACD Property Available" screen.
8.
Check that paper properties have been successfully generated on the "Paper" screen.
Also, check that the [ACD] field of the paper to generate paper properties is set to [Enabled].
• To continue generating paper properties, select a sheet of paper with the [ACD] field set to
[Disabled], and then click [ACD Property] in the screen.
• To back up the Auto Color Diagnosis property status and the date of generation, use the backup
function in "Disk Operations" on the "Configuration" tab in the "TotalFlow" window. When you
restore the data, do so using the normal restore function. (Do not restore the data partially.)
Generating Paper Properties (When Using TotalFlow)
DWQ754
17