Ricoh Pro L4130 관리 및 유지보수 매뉴얼 - 페이지 9

{카테고리_이름} Ricoh Pro L4130에 대한 관리 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro L4130 29 페이지. Wide format color digital imaging system
Ricoh Pro L4130에 대해서도 마찬가지입니다: 안전 주의사항 (17 페이지), 사양 (4 페이지), 매뉴얼 인쇄 (8 페이지)

페이지 인쇄

Replacing method of absorber kit ("Replacing method of

absorber kit" Chapter 4 of the Operation Manual)

If ink adheres to the absorber, it is required to replace the absorber.

Rough guide for replacement:

Replace when the concavity and convexity of the surface of the absorber

are filled with ink as indicated in the right photo.

In addition, when you replace the absorber, clean ink adhering to the

capping station at the same time.

• To replace the absorber, the absorber kit separately sold is

required. Contact a distributor in your district or our office

for purchasing it.

Press the

Press

Press the

• The carriage moves to the maintenance position.

• If the carriage is not covered by the ink cap for a long period of

time, the nozzle face of the head may get dry and clogged,

resulting in white lines being left in the printed image.

• The buzzer sounds periodically while the carriage is out of the

capping station. The buzzer sounds at shorter interval when the

print heater temperature is high.

Open the rght maintenance cover then remove

the absorber.

• Pull out the absorbers (x 4).

Insert a new absorber.

• There are two types' absorbers and four in total

(absorber x 1, absorber 2 x 3).

• Be careful not to mess up the positions to which they are

inserted.

key in LOCAL.

MAINT.

key.

to select [STATION MAINT.].

key.

Dirty absorber

CARR I AGE OU T

MOVE POS I T I ON

: S T A T I ON MA I N T .

MOVE POS I T I ON

: S T A T I ON MA I N T .

Carriage

absorber

absorber2

[ EN T ]