Ricoh Pro L4130 매뉴얼 인쇄 - 페이지 3
{카테고리_이름} Ricoh Pro L4130에 대한 매뉴얼 인쇄을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro L4130 8 페이지. Wide format color digital imaging system
Ricoh Pro L4130에 대해서도 마찬가지입니다: 안전 주의사항 (17 페이지), 사양 (4 페이지), 관리 및 유지보수 매뉴얼 (29 페이지)
페이지 인쇄
Prepare RICOH Pro L4130/L4160
Following the procedures below, prepare RICOH Pro L4130/L4160.
1.
Connect a PC in which the attached
RICOH Software RIP is installed with
RICOH Pro L4130/L4160.
• For details, refer to
L4160 Operation
2.
Turn on the power supply of RICOH Pro
L4130/L4160.
• For details, refer to
Operation
3.
Before setting a media, check the height of
print head.
• For details, refer to
Operation
• Adjust the Height-adjusting lever depending on the
media to be used.
4.
Set the media.
• When setting the roll media
• When setting the leaf media :
5.
Perform a test printing.
• Check if discharging defect such as nozzle clogging exists or not.
• For details, refer to
6.
Perform a feed correction.
• Correct the feeding rate of media.
• For details, refer to
7.
Perform a test dot position correction.
• Correct the ink drop position.
• For details, refer to
P.1-10 of RICOH Pro L4130/
Manual.
P.2-3 of RICOH Pro L4130/L4160
Manual.
P.2-5 of RICOH Pro L4130/L4160
Manual.
:
P.2-8 to 12 of RICOH Pro L4130/L4160 Operation Manual
P.2-14 to 15 of RICOH Pro L4130/L4160 Operation Manual
P.2-20 to 21 of RICOH Pro L4130/L4160 Operation
P.2-23 to 24 of RICOH Pro L4130/L4160 Operation
P.2-25 to 26 of RICOH Pro L4130/L4160 Operation
- 3 -
USB cable
Power switch
Height-adjusting lever
Manual.
Manual.
Manual.