Ricoh Pro L4160 관리 및 유지보수 매뉴얼 - 페이지 2

{카테고리_이름} Ricoh Pro L4160에 대한 관리 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro L4160 29 페이지. Wide format color digital imaging system
Ricoh Pro L4160에 대해서도 마찬가지입니다: 안전 주의사항 (17 페이지), 사양 (4 페이지), 매뉴얼 인쇄 (8 페이지)

페이지 인쇄

2. Daily care and maintenance

Tools required for Maintenance

Clean stick

Pro Maintenance kit

Wiper

Absorber kit

Surroundings of the heads ("Cleaning the Head and the Area around It" Chapter 4 of

the Operation Manual)

Because the head employs a very precise mechanism, due care needs to be taken when it is cleaned.

Using a clean stick, etc., rub off gelatinous ink or dust that may stick to the lower part of the slider and the area

around the head.In doing so, never rub the nozzles of the head.

Tools required for cleaning

• Be sure to wear the attached goggles and gloves when cleaning the area around the

head.Otherwise, you may get ink in your eyes.

• The ink contains organic solvent.If you get the ink on your skin or in your eyes, wash it away

with plenty of water immediately.

Press the

Press

Press the

• Carriage will move to the left end of this device.

• If the carriage is not covered by the ink cap for a long period of

time, the nozzle face of the head may get dry and clogged,

resulting in white lines being left in the printed image.

• The buzzer sounds periodically while the carriage is out of the

capping station. The buzzer sounds at shorter interval when the

print heater temperature is high.

Item Name

• Clean stick

key in LOCAL.

MAINT.

key.

to select [HEAD MAINT.].

key.

• Gloves

• Goggles

CARR I AGE OU T

MOVE POS I T I ON

: S T A T I ON MA I N T .

MOVE POS I T I ON

: HEAD MA I N T .

[ EN T ]