Ricoh Provence-P2W 서비스 매뉴얼 - 페이지 4

{카테고리_이름} Ricoh Provence-P2W에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Provence-P2W 48 페이지. Machine code: j006

Before Installation, Maintenance

Shipping and Moving the Machine



CAUTION

1. Work carefully when lifting or moving the machine. If the machine is heavy,

two or more customer engineers may be required to prevent injuries (muscle

strains, spinal injuries, etc.) or damage to the machine if it is dropped or

tipped over.

2. Personnel moving or working around the machine should always wear proper

clothing and footwear. Never wear loose fitting clothing or accessories

(neckties, loose sweaters, bracelets, etc. ) or casual footwear (slippers,

sandals, etc.) when lifting or moving the machine.

3. Always unplug the power cord from the power source before you move the

machine. Before you move the machine, arrange the power cord so it will not

fall under the machine.

Power



Warning

1. Always turn the machine off and disconnect the power plug before doing any

maintenance procedure. After turning the machine off, power is still supplied

to the main machine and other devices. To prevent electrical shock, switch

the machine off, wait for a few seconds, then unplug the machine from the

power source.

2. Before you do any checks or adjustments after turning the machine off, work

carefully to avoid injury. After removing covers or opening the machine to do

checks or adjustments, avoid touching electrical components or moving parts

(gears, timing belts, etc.).

3. After turning the machine on with any cover removed, keep your hands away

from electrical components and moving parts. Never touch the cover of the

fusing unit, gears, timing belts, etc.

Installation, Disassembly, and Adjustments



CAUTION

1. After installation, maintenance, or adjustment, always check the operation of

the machine to make sure that it is operating normally. This ensures that all

shipping materials, protective materials, wires and tags, metal brackets, etc.,

(attached to protect the machine during shipping), have been removed and

that no tools remain inside the machine.

2. Never use your fingers to check moving parts that are causing spurious

noise. Never use your fingers to lubricate moving parts while the machine is

operating.