Ricoh Ri 100 빠른 매뉴얼 - 페이지 3
{카테고리_이름} Ricoh Ri 100에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Ri 100 4 페이지. Direct to garment (dtg) printer
Ricoh Ri 100에 대해서도 마찬가지입니다: 참고 (12 페이지), 안전 정보 매뉴얼 (24 페이지), 유지 관리 매뉴얼 (12 페이지), 빠른 설치 매뉴얼 (4 페이지), 빠른 매뉴얼 (4 페이지), 빠른 설치 매뉴얼 (23 페이지), 사용자를 위한 참고 사항 (32 페이지)
페이지 인쇄
3
Printing
For details, refer to User's Guide provided with the printer Ri 100.
4
Fixing ink (Fix
➊
Make sure the mode switching lever is set in the
center.
➋
Set the temperature of the heater.
Set the temperature according to the fabric on
which you are printing. The default setting is
"High".
➌
Set the amount of time that the heater is on.
Set the time according to the fabric on which
you are printing. The default setting is "Medium".
➍
When the [Preheat] key is lit, press the [Preheat]
key to start preheating.
When the [Preheat] key is unlit, no operation is
necessary because preheating is completed.
➎
Press the [Stop/Unlock] key for 1 second or
more to open the cover. When set to the profes-
sional mode, it is not necessary to hold down
the [Stop/Unlock] key.
➏
➐
)
➑
➒
When you move the mode switching lever to the
right, processing starts. An alarm sounds after
preheating is completed.
❿
⓫
Confirm that the mode indicator light is off.
⓬
Press the [Stop/Unlock] key for 1 second or
more to open the cover. When set to the profes-
sional mode, it is not necessary to hold down
the [Stop/Unlock] key.
⓭
⓮