Ricoh SG Series 펌웨어 업데이트 - 페이지 6

{카테고리_이름} Ricoh SG Series에 대한 펌웨어 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SG Series 16 페이지. Web image monitor
Ricoh SG Series에 대해서도 마찬가지입니다: 펌웨어 업데이트 (21 페이지)

Ricoh SG Series 펌웨어 업데이트

5. Firmware Update Operating Instructions

These instructions explain how to update the firmware of the machine.
Before you start the update, make sure of the following:
The machine is in standby mode.
No applications are running on the computer.
The machine is connected to the computer with a USB cable or via network peer-to-
peer.
The following procedure uses Windows 7 screenshots and is based on the SG3110DN
model.
Depending on the printer driver and its settings, update procedures might vary.
Open the properties dialog box for the machine in use and check the port status.
If "bidirectional" support has been enabled in the printer properties dialog box:
Update the firmware by following the update procedure shown in section 5.1.
If "bidirectional" support in the printer properties dialog box has been disabled:
Update the firmware by following the update procedure shown in section 5.2.
* We recommend you enable bidirectional support.
6