Ricoh SP 100 e 제품 지원 매뉴얼 - 페이지 4
{카테고리_이름} Ricoh SP 100 e에 대한 제품 지원 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP 100 e 19 페이지. Black & white multi function laser printer
Ricoh SP 100 e에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지), 사양 (2 페이지)
페이지 인쇄
Installation
Installation Requirements
Temperature Range:
Humidity Range:
Ambient Illumination:
Ventilation:
Ambient Dust:
Avoid areas exposed to sudden temperature changes:
Do not place machine where it will be exposed to corrosive gas or vapor.
Do not install the machine at any location over 2,000m (6,562 ft.) above sea level.
Place the machine on a strong and level base. Inclination on any side should be no more than 5mm (0.2")
Do not place the machine where it may be subject to strong vibrations.
Machine level
Power Requirements
Input voltage level: 110 - 120 V, 60Hz: 6A
Do not place anything on power cord.
The required wall outlet is a NEMA 5-15R
Space
Foot Print
Dimensions (W x D x H):M101: 402 x 368.5 x 119 mm (15.83" x 14.51" x 4.69".)
Note: Measuring conditions: Front door closed. Rear vertical paper tray, not extended.
Ver.1.0
Product Support Guide
Model M101 / M102 / M103
15 C to 25 C (59 F to 77 F)
30% to 70% RH
Less than 2,000 lux (do not expose the AIO to strong light, especially direct
sunlight)
3 times/hr/person
Less than 0.075 mg/m
Areas directly exposed to cool air from an air conditioner.
Areas directly exposed to heat from a heater.
Front to back: within 5mm (0.2") of level
Right to left: within 5mm (0.2") of level
(receptacle)
M102: 402 x 368.5 x 163 mm (15.83" x 14.51" x 6.42".)
M103: 402 x 368.5 x 205 mm (15.83" x 14.51" x 8.07".)
Page 4 of 18
Subject to change without notice
3
3
(2.0 x 10-6oz/yd
)
A (Front)
B (Left)
C (Rear)
D (Right)
400mm (16")
100mm (4")
200mm (8")
100 mm (4")
6/26/2012